ECOSASH
EcoSash® is an innovative device from TPE that dramatically improves the energy saving capability of a variable air volume (VAV) fume cupboard. The EcoSash® Retrofit Kit offers energy savings for existing VAV fume cupboards – regardless of who manufactured them.
TAD EMS
Temprecord Active Display (TAD) Real Time Monitoring System monitors temperature, humidity, CO2, room pressure differential, power failure and door opening information as it happens, then sends out a warning enabling action to be taken in a timely manner to preserve critical items.
Medical
Multiple use logger for Medical shipment use. The Medical data loggers are fitted with long-life Lithium Thionyl Chloride (3.6V) batteries with a wide operating temperature range, allowing low-temperature recordings down to –50°C(-58°F).
Multitrip Blue - Supercool
Multiple use logger for shipment monitoring featuring 8K of memory and selectable push button start and stop, the Econolog offers an economical means of monitoring your shipment temperature where the Mon-T will not do.
Scientific Dataloggers
Calibrated and supplied with a traceable calibration certificate to ISO 17025 standards, the scientific datalogger records ensures integrity of critical products. With an accuracy of up to 0.2?C / 0.36?F and a display resolution of 0.01, and water proof to IP67, these loggers provide a robust but highly accurate solution for a multitude of high accuracy applciations.
Relative Humidity Dataloggers
Combined temperature and relative humidity logger, with a market leading 3% accuracy on the RH accuracy, as well as the high degree of accuracy and resolution to be expected from the Temprecord range.
G4 Multitrip
Multiple use logger for shipment monitoring featuring 8K of memory and selectable push button start and stop with three different external probe options offering the most reliable and accurate way to monitor your in product temperatures from -80 to +110?C (-112 to +230?F) with an accuracy of 0.2?C. Available as standard (Green), Low Temperature (Light Blue) and Supercool (Blue) models, the units come with a 3 point calibration for assured accuracy.
Mon-T Datalogger
Extremely cost effective, multiple use logger for shipment monitoring. Featuring 4.6K of memory and selectable push button start and stop, the Mon-T offers an economical means of monitoring your shipment temperature to 0.5?C accuracy.
Econolog Dataloggers
Multiple use logger for shipment monitoring featuring 8K of memory and selectable push button start and stop, the Econolog offers an economical means of monitoring your shipment temperature where the Mon-T will not do.
Datalogger Holder
The Temprecord Datalogger holder is a strong, durable and waterproof polycarbonate holder, specifically designed to hold the Temprecord Dataloggers in position, while offering instance access for data download or maintenance.
External Probes
Temprecord Multi-Trip and Scientific dataloggers can be supplied with optional external probes which extend the temperature recording range of the logger and allow precise and targeted data to be collected
Steam Quality Test Kits
The SQ-Pro Steam Quality Test Apparatus was developed to enable test engineers to provide reliable and efficient testing to EN 285 requirements without the need for bulky or difficult to use equipment. Steam Quality Testing has been an EU requirement for many years (ISO EN 285) and has been adopted by the world's pharmaceutical and healthcare industries.
Bowie and Dick Test Packs
Conforming to EN 285 and EN 867-3, the Bowie-Dick Test is a diagnostic visual test performed to ensure the dynamic-air-removal system (Vacuum system) of a steam sterilizer is effective in removing any air that may be trapped or leaked into the sterilization chamber.
Standard Test Packs
Sheet size 120cm x 90cm. The sheets are made from 100% bleached cotton sheets. 38 are supplied to enable a pack to be formed. The towels should be washed to remove dressing before being used as required by EN 285: 2006, 24.1.
Standard Test Pack Wrap
EN 285 requires that, before use, the Standard Test Packs be compressed by hand, wrapped in a similar fabric and secured with tape that is no more than 25 mm wide. The Standard Test Pack Wrap turns this fiddly and frequent operation into a simple and easy-to-use procedure. The STP Wrap is designed for use with the EN 285 Standard Test Pack.
PressureDisk
Temperature and pressure monitoring during the sterilization and pasteurization processes is now an easy, accurate task for anyone, with the PressureDisk (140°C and 5bar abs) data loggers.
PasteurDisk
Temperature and pressure monitoring during the sterilization and pasteurization processes is now an easy, accurate task for anyone with the PasteurDisk (100°C) data loggers.
Series 300 Temperature Calibrator
The Series 300 bath has an operating range from 40°C to 325°C. The large sensor capacity of three 3mm, three 6mm, and one 10mm diameter holes make the unit particularly suitable for thermocouple calibration.
Series 275 Thermometer
The Series 275 is a single channel, hand-held temperature measuring system consisting of a high accuracy platinum resistance sensor coupled with a high accuracy digital thermometer. The combination of sensor and thermometer is calibrated by a UKAS accredited test house at five temperatures.
S-Micro and P-Micro Dataloggers
The S-Micro (140°C) and P-Micro (100°C) data loggers now make temperature monitoring in sterilization and pasteurization processes even simpler, thanks to their reduced dimensions that make them the monitoring device for autoclaves with the smallest volume in the world.
